Free App Enables Facility Managers To View Led Lighting Savings

A free smart device app and Web-based tool has been developed to allow anyone in South Africa to calculate how much energy, cost, and greenhouse-gas emissions may be saved by switching to light-emitting diode (LED) lighting while maintaining or improving the quality of luminescence.

A team from State-owned South African National Energy Development Institute (SANEDI), supported by German development agency GIZ and the South African German Energy Partnership, investigated three public sites in South Africa used by government agencies or departments using the app, and each site demonstrated significant savings in energy and costs, as well as rapid payback periods of up to two years, SANEDI Renewable Energy Centre of Research and Development manager Dr Karen Surridge said on October 28.

“The first site involved only security lighting, including streetlights and outdoor lights. The capital expenditure (capex) was calculated at R2.4-million, with a payback period of 1.02 years and total cost savings of R7.1-million over the lifecycle of the lamps. This prompted the building managers to retrofit their buildings for energy-efficient LED lights,” she said.
The second site evaluated required simply outdoor illumination, but it also required enough lighting to accommodate security camera surveillance. The capex was anticipated to be R280 000, with a total lifetime savings of R1.8 million and a payback period of less than six months.

The third site involved multiple office blocks, all of which are public buildings in use, with capex for a retrofit estimated at R3.4-million, but resulting in a payback period of two years and total savings over the lifetime of the LED lights of R9.8-million.

“In a typical residence, lighting can make up 10% to 20% of electricity costs, and lighting is one of the major loads in public and commercial buildings. Improvements in this area would enable a shift to lower energy consumption without losing lighting quality,” Surridge said.

The SANEDI Energy Efficient Lighting (SEEL) digital tool was created to help users accurately estimate costs based on municipal tariffs, the type of fittings and bases to use to reduce retrofit costs, the cost of LED lights in their area, and the costs of recycling and safe disposal of removed lighting.

“The tool was designed to be used in public buildings to assess the buildings’ lighting component in terms of their energy consumption and then predict the return on investment and payback time. The tool enables every public building and facilities manager to accurately determine the cost of a retrofit of his or her facilities and the predicted cost and energy savings with which to substantiate this to their superiors and to budget councils,” Surridge said.

The SEEL tool enables users to specify the exact fitting type and base type of each light, and provides hardware price ranges based on prices in the region.

“If a retrofit can use the same fittings and bases, then it helps minimise costs and make such a project simpler. The app also specifies the lowest price for an LED light that provides the same or better luminescence as the light that is to be retrofitted, to keep the cost of retrofit low and ensuring that the occupational health and safety standards, in this case quality of lighting, in a building is maintained,” she said.

Many lights can be easily changed with LED lights without the need to modify the fittings or bases, thanks to fast advancements in LED lighting technology in recent decades. LED lighting also has a high efficiency, high luminescence, and luminous flux, as well as a quick start, safer operation due to reduced operating temperatures, and more colour rendering index support, according to Surridge.

Additionally, the tool is designed to enable building managers and specialists to also take into account the angle of street and outdoor lights and the distance to the intended surface to ensure the required illumination is achieved.

Users of the tool can also manually input specific information, such as if they know exact details for their site or facility, and can also extract daily, monthly and yearly energy consumption for lighting.
Further, the raw data from the tool can be exported to a spreadsheet program, such as Excel, for further use.

“The tool enables users to measure the greenhouse-gas emission contributions from their lighting, and enables them to report on these numbers and the emission savings they have achieved if they implemented energy efficient lighting.

“This is especially important as government departments and agencies have to report on their greenhouse-gas emissions and savings, and the tool can help them to quantify their emissions and savings,” added Surridge.
The SEEL tool was designed to enable building managers, especially of public buildings, to quickly and easily use the tool to investigate the impact of energy efficient lighting in their buildings, and the information can be used to motivate the business case of, for example, a retrofit project to their superiors, she said.

The SEEL tool was one of three GIZ-supported energy efficiency and energy efficient lighting projects in South Africa that were detailed during a webinar on October 28.
Professional services and consulting engineering company SMEC South Africa lead engineer Stephen Reynders detailed the study on recent South African research conducted in the fields of energy efficiency and energy efficient lighting. This study highlighted the work and active academic work present in South Africa, as well as identified gaps and potential areas of research that would be further investigated as part of the bilateral engagement between South Africa and Germany.

Further, GIZ South-African German Energy Programme energy efficiency investment energy adviser Clifford Rikhotso gave insight into the second phase of the energy efficient lighting demonstration site project, which has seen an energy efficient lighting demonstration site established at research commercialisation facility, the Innovation Hub.

Demonstration sites can serve as test-beds to accurately assess and design energy efficient lighting in municipalities and cities, as well as smart city-ready lighting systems and as demonstration sites for manufacturers and technology providers.

The project has resulted in the energy efficient lighting demonstration site at the Innovation Hub being expanded to include the campus’ entire lighted areas.

Special economic zone the Dube TradePort and the eThekwini municipality are in advanced planning stages to also set up a demonstration site at the DubeTrade Port, in KwaZulu-Natal.

“Engineers, municipal planners, service providers, and political leaders may witness energy efficient lighting systems in action and evaluate different designs and technologies at demonstrations. This project is modelled on the success of the LED walkway in Berlin, Germany, which continues to raise much-needed awareness of and engagement with energy-efficient technology among students, academics, and professionals “He went on to say.

Exit mobile version